Hide Filters
Filters 0
Sort by :
Filters 0
product-sticker-New Arrival
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
Soft and Compressible Filter Bottle - 1 Litre - MT500
FORCLAZ

Soft and Compressible Filter Bottle - 1 Litre - MT500

8575761
$35.00
$26.00
-25%
Tax included
product-sticker-New Arrival
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
  • Soft and Compressible Filter Bottle - 1 Litre - MT500
Soft and Compressible Filter Bottle - 1 Litre - MT500
Size:
Quantity

Home Delivery
Within 48 Hours
Available
Click & Collect
Pickup in store within 4 Hours
Our team of trekking enthusiasts created this filter water bottle to carry and filter water while trekking. Soft bottle, quick-fitting cap. 1 litre.

Trekking enthusiasts created this filter water bottle to make water drinkable on the go. With a soft bottle and quick-fitting cap, it's easy to carry and filter water while trekking.

Bottle body: 3.0% Polypropylene, 86.0% Silicone, 11.0% Polyester; Straw: 18.92% Polyurethane, 72.97% Acrylonitrile Butadiene Styrene, 8.11% Polysulfone; Lid: 46.43% Polypropylene, 3.57% Silicone, 39.29% Polyester, 7.14% Acrylonitrile Butadiene Styrene, 3.57% Thermoplastic Polyethylene

BENEFITS

Filtration

Filters 99.9999% of bacteria and 99.9% of protozoa. Flow rate: 0.94 l / mn.

Autonomy

Filters up to 1000 litres of waters, blocks itself once the limit is reached.

Easy opening / closing

Opens quickly with 1 hand & closes easily.
A cap protects the teat.

Robustness

In silicone: light, very strong and compressible. No after-taste.

Ease of use

Wide opening for easy filling, carry handle. Removable filter.

Isothermal

Non-isothermal.

Compatibility

Replacement filter MT500, reference: 8553332

TECHNICAL INFORMATIONS

First use

Flask with built-in and removable filter. You can use the product without filter just like a traditional flask.

Before first use, rinse the bottle, top and filter with drinking water (3 x 1 minute).
When using for the first time or whenever the filter is dry, fill the bottle with water, screw on the cap and leave to stand for a few minutes to prime the filter. Then draw in 5 quick sips to enable the water to flow.

Directions for use

Rinse your water bottle and the drinking water filter to remove dust and impurities.
Fill the bottle with fresh water (avoid stale and stagnant water) from the best source available without polluting the teat or cap. The more clear and clean the water is before filtering (lack of impurities) the longer your filter will last.
Be careful not to drink water that flows the length of your bottle when drinking. Make sure that the bottle is closed tightly.

Advice for use (continued)

Drink by inserting the teat into your mouth and pressing lightly on the body of the bottle to adjust the pressure and amount of water to drink.

Your bottle no longer filters water when it reaches the end of its lifespan.
If you can no longer suck the water, it is time to replace the part that contains the filter.
Thoroughly dry your filter after use.

Technical information about the filter

We use a hollow-fibre filter that has pores of around 0.2 micrometres in diameter.
It eliminates:
- 99.9999% of bacteria (for example: E.coli); - 99.9% of
Protozoa (for example Cryptosporidium);
- Micro-organisms.

DOES NOT ELIMINATE VIRUSES.
Do not use to treat sea water or water contaminated by chemicals

Care tips

After each use, unscrew the cap, rinse the bottle, top and filter with drinking water and allow to dry thoroughly. Before washing the bottle, remove the filter.
Do not put the filter in the dishwasher. Do not try to clean the fibres in the plastic housing. If in doubt, change the filter.

Storage advice

Store in a cool, clean and dry place after completely drying the product.
If, when you reuse the filter, you find that the water no longer passes through it or only with great difficulty, here's what to do.
Immerse the filter in clean, clear water for about 15 minutes to dissolve any dirt that may have stuck to the surface of the filter membrane. Then rinse the filter and leave it to dry.
It should be back to its best.

Weight and dimensions

Volume: 1 litre
Size: Ø 8,5 cm x h 27 cm
Total weight: 180 grams
Bottle weight: 140 g.Filter weight: 40 g.
Filter dimensions: Ø 6,5 cm x h 8 cm
Available in 0.6 L and 1 L
Available with or without filter.
The filter is also sold separately.

Caution

Drinking untreated water and improper use can expose you to harmful micro-organisms and increase the risk of gastrointestinal disorders.

You can reduce these risks by following these safety instructions and by getting more information on the water sanitation conditions in the areas you’ll be visiting.

If in doubt, we advise you to enhance the filtering process by using water purification tablets.

Materials and regulations

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.